HOME | DD

Janes-Wardrobe — 1940s pinny instructions

Published: 2010-02-28 14:39:47 +0000 UTC; Views: 5662; Favourites: 23; Downloads: 138
Redirect to original
Description By request, I'm not the best with photoshop for drawing but hopefully this covers it.

The pictures are from contemporary adverts and dress makers patterns, below is my interpretation.

The fabric I used was actually 150cm wide but I laid it out to see how well I could cut it from 36" wide fabric. The result is the layout above. There is enough fabric for a second pocket if you wanted but to save fabric I cut it in the back neck scoop.

Here's the pinny [link]
To enable cutting from such a small piece of fabric you first have to cut it into the piece you are going to use for the skirt and fold that in two so you can cut the front of the pinny on the centre fold. The selvedges of the remaining piece have to be folded to the centre of the fabric so you have two folds to cut the front and back body pieces from.

This is a small pinny, a larger one would need more fabric.
Related content
Comments: 2

lasmith [2010-03-03 20:07:41 +0000 UTC]

Thank you so much! Your photoshop drawings are prefect. They give just the info i was curious about.

👍: 0 ⏩: 1

Janes-Wardrobe In reply to lasmith [2010-03-04 21:09:31 +0000 UTC]

Thanks, the drawings are far from perfect but they do give just about enough information to enable someone with half an idea draft and cut their own.

I was reading today about rationing in WWII in the UK. A pinny would have cost 3 clothings coupons whereas 'non wool fabric 44" wide' would only cost 2.5 coupons. Well 44" is roughly 1.25 yards so 1 yard of 44" wide fabric would be enough to make this pinny, saving half a clothing coupon to use for something else. Not much you might think but in 1942 you only got 66 coupons per year and that fell first to 48 coupons and finally to 36 coupons by 1945. Tough times!

👍: 0 ⏩: 0