HOME | DD

Sorelliena — Wing Earrings by-nc-nd

Published: 2011-02-28 23:33:13 +0000 UTC; Views: 15683; Favourites: 630; Downloads: 0
Redirect to original
Description Double edit: ;_; I've received many requests as comissions for these wings... the problem is, I cannot make you a pair unless I can meet you in real life. This is because of the really extremely nitpicky measurements of an ear--the length, width, thickness, angle, and arch of your ear all need to be considered when making these. So unfortunately, commissions won't be happening until I figure out a good way to take these measurements...

I had designed and planned for wing earrings like these for a while... couldn't ever find a pair, so I DECIDED TO MAKE THEM D< getting pretty experimental here...

The wings can be worn in two ways: hanging down (which looks quite nice with the right arch) and flaring up (which protrudes out of my hair and makes me look elfish 8))

I'm pretty sure I don't own a copyright to these kind of wings (or do I? O_O) But if you do decide to make your own because you've been inspired by these, please message me! I'd love to see what you've made!

This is my take on them. I quite like these. They're not heavy at all, contrary to popular belief, and are quite comfortable to wear if you make your support wires wide enough to just clip onto your ears They are also eye-catching, and I get lots of comments on them.

Total time: 7 hours making. 3.5 hours a wing. These babies take forever, believe me.

Thanks for viewing!
Related content

Sorelliena - Rose Earrings

Sorelliena - the caged bird

Sorelliena - Forsaken, Again

Sorelliena - the choice

Sorelliena - Phoenix reference

Sorelliena - See To These Chains

Sorelliena - Dark Angel, Light Angel

Sorelliena - Secretive

Sorelliena - Raven Hallows-Grimm

Nabila1790 - Snitch Earrings

KittyAzura - White Winged Ears

StorytellerZero - Cloud Fox White Pearl Ears [DD]

cherryboop - Commission 15

Evazgar - Mechanical Birdie Ear Cuff

SteamDesigns - Hanging Angel Wing Earrings

dagett - clay 51

Wonder-fox - Mechanical wings

netherwings - Live and die this way
Comments: 182

Sorelliena In reply to ??? [2014-03-09 17:34:00 +0000 UTC]

I am, unfortunately, unable to make customs.  I tried.  The specifics on measuring a person's ears are really terribly glitchy and difficult, plus these are clay, so they don't bend like metal wing earrings.  I was going to do a tutorial years ago but.... alas ;_;

👍: 0 ⏩: 1

Shadowbane-kimikaro In reply to Sorelliena [2014-03-09 18:25:06 +0000 UTC]

Darn and i really liked those too V_V,well if i figure out how to make them I'll make a pair for myself ok  

👍: 0 ⏩: 0

Karma-Manipulation [2013-08-23 08:18:48 +0000 UTC]

Oh my oh my, I -have- to try make a plug version of those! So pretty! <3

👍: 0 ⏩: 1

Sorelliena In reply to Karma-Manipulation [2013-08-24 17:27:11 +0000 UTC]

oooh! please do! C:

👍: 0 ⏩: 0

ShaniiiiB [2013-03-10 05:59:19 +0000 UTC]

Have the client roll ink onto their ears and then use their ear the same way one would use a stamp. They could then mail you the imprint of their ear. (they could wash the ink off easily as long as they got the right kind, or were willing to use solvents if they used more permanent inks). Once they made the imprint they could mail them to you (or imprint onto basic graph paper and e-mail them to you, then even if the size changed you could figure out the correct measurements based upon the normal measurements of standard graph paper). That way you could have the exact info (shape/measurements) of their ear Hope that makes sense (it makes sense to me...but then I am not usually considered normal!)

👍: 0 ⏩: 0

DaiNoShojoNoYami [2012-10-31 23:27:46 +0000 UTC]

I could always send you the measurements of my ear >.>

👍: 0 ⏩: 1

Sorelliena In reply to DaiNoShojoNoYami [2012-11-02 00:42:20 +0000 UTC]

And if I make it wrong, that means you've paid me probably something like $35 USD for a defunct product.

👍: 0 ⏩: 1

DaiNoShojoNoYami In reply to Sorelliena [2012-11-02 20:40:39 +0000 UTC]

No... I would have just paid $35 for a piece of art... or a Christmas Tree decoration...

I'd find something to use it for

👍: 0 ⏩: 1

Sorelliena In reply to DaiNoShojoNoYami [2012-11-03 06:25:54 +0000 UTC]

Well, thank you for your considerations, in any case. For now I am away in university so I am neither equipped nor do I have the time (/rage). If you'd like and still remember by the summer, though, we can try and work something out

👍: 0 ⏩: 1

DaiNoShojoNoYami In reply to Sorelliena [2012-11-06 04:23:40 +0000 UTC]

Definitely. With earrings like this at stake, how can I afford to forget?

👍: 0 ⏩: 0

xclevermadness [2012-10-13 14:48:22 +0000 UTC]

with what did you make those earrings?

👍: 0 ⏩: 1

Sorelliena In reply to xclevermadness [2012-10-13 18:27:06 +0000 UTC]

White polymer clay. Sculpey. though i believe Fimo is better, according to some websites, as it is more durable.

👍: 0 ⏩: 0

moran2558 [2012-08-03 01:27:22 +0000 UTC]

etsy!

👍: 0 ⏩: 0

PrimeTorch [2012-07-22 20:40:34 +0000 UTC]

They're beautiful! Wety nice!!!
What are they made of?

👍: 0 ⏩: 1

Sorelliena In reply to PrimeTorch [2012-07-27 17:21:55 +0000 UTC]

Polymer clay

👍: 0 ⏩: 1

PrimeTorch In reply to Sorelliena [2012-07-28 11:23:42 +0000 UTC]

Ok, thanks!!

👍: 0 ⏩: 0

Lol-Phail [2012-04-27 02:03:22 +0000 UTC]

I love these!

👍: 0 ⏩: 0

TerraRhapsody [2011-10-23 13:04:09 +0000 UTC]

So beautiful! fantastic work and such intricate detail!

👍: 0 ⏩: 1

Sorelliena In reply to TerraRhapsody [2011-10-24 16:50:02 +0000 UTC]

Thank you kindly ^^

👍: 0 ⏩: 0

Moru-sama [2011-10-22 03:41:32 +0000 UTC]

um could i measure my own ears and tell you? lol

👍: 0 ⏩: 1

Sorelliena In reply to Moru-sama [2011-10-24 16:50:18 +0000 UTC]

I think I'm just going to make a tutorial for it at some point XD that way people can make their own~

👍: 0 ⏩: 0

Yuperos [2011-10-17 13:54:23 +0000 UTC]

Thank you very much for the idea. I made earrings like yours and presented them on birthday of my girlfriend. She was delighted. ^_^
[link]

👍: 0 ⏩: 1

Sorelliena In reply to Yuperos [2011-10-18 04:19:12 +0000 UTC]

Very lovely I like the curve of your feathers! And I hope you got it to attach to her ears properly, it's really painful if done wrong ;_;

out of curiosity, what did you use for the upper ear hook? I had to use spare wires hanging around--got any suggestions for something better?

👍: 0 ⏩: 1

Yuperos In reply to Sorelliena [2011-10-19 10:30:38 +0000 UTC]

I use 2.5mm copper wire. I flexed them as close as possible to the form of auricles. And for the test, within 3 hours at home I wearing this attachment on my ears (without earrings of course) and about after 30 minutes I understood that somewhere lost one of my attachment!! But I soon found it... It is still hanging on my ear. but I wasn't feel any pain or discomfort of.
In my opinion that is the most comfortable and good holding on ear type of attachment.
[link]

P.S. Excuse me if my comments are hard to read. Unfortunately I don't know English very well. = DDD

👍: 0 ⏩: 1

Sorelliena In reply to Yuperos [2011-10-19 22:51:21 +0000 UTC]

OH MY GOSH, that is so smart! Thanks a lot 8) I think my wire was too thin, which was why it was uncomfortable. But thanks for the tip!

👍: 0 ⏩: 0

WolfySM [2011-09-28 17:19:41 +0000 UTC]

awww lovely

👍: 0 ⏩: 0

ME-Jones [2011-09-23 17:48:54 +0000 UTC]

OH, I would defiantly love to commission you for a pair of these... O_O

Maybe, for getting ear measurments, you should tell us exactly what you want? If the people want these bad enough, we'll measure our own ears XD

👍: 0 ⏩: 1

Sorelliena In reply to ME-Jones [2011-09-25 00:45:27 +0000 UTC]

Oh my, that's a good recommendation

the only problem is if even the slightest measurement is off... bleh the whole earring would go out of place X_X plus, I'm not sure how I'm going to get an ear model for this O_O

👍: 0 ⏩: 1

ME-Jones In reply to Sorelliena [2011-09-25 00:51:55 +0000 UTC]

Oh. Darn... XD They really are beautiful, and I'd love a pair, but I understand your predicament...

👍: 0 ⏩: 0

TaintedAndWinged208 [2011-07-08 15:48:31 +0000 UTC]

oh my! these are incredible! I would love to know how you made them...but I don't want to ruin it

👍: 0 ⏩: 2

Sorelliena In reply to TaintedAndWinged208 [2011-07-11 17:37:43 +0000 UTC]

8) Thank you! I was thinking of making a tutorial... but I've been kind of busy... -sigh-

I wish I could make some type of commissioning for these but ear specifications are even more precise than feet specifications -_-

👍: 0 ⏩: 0

TaintedAndWinged208 In reply to TaintedAndWinged208 [2011-07-08 15:52:15 +0000 UTC]

haha my bad. Clay. ><

👍: 0 ⏩: 0

Silver-Kit [2011-06-05 01:16:15 +0000 UTC]

O.o

these are so amazing! if i could wear earnings i would find a way. darn allergies..!!!! they stop me from everything!! (..having and pets or nickles jewelry) But there are EPIC!! ever thought about a tutorial?

👍: 0 ⏩: 1

Sorelliena In reply to Silver-Kit [2011-06-05 17:00:26 +0000 UTC]

oh, man, I'm sorry to hear about your allergies! D:

I am indeed planning to make a tutorial at some point... probably in the summer, when I have time I'm thinking of ways to make these wear-able for people who don't have piercings, though there won't be the hanging-down wing function of I do so. I say keep a watch out in the next month or two of how to make these XD

👍: 0 ⏩: 1

Silver-Kit In reply to Sorelliena [2011-06-05 17:50:42 +0000 UTC]

seriously? THAT made my day!!! ..... O.o

(i don't have piercings... cuz of the allergies...long story)

if i could i would hug you and give you the cinnamon bun that's in my kitchen. I like the up wings a lot better It's really unique and I ave an obsession with wings and i love that they kind of cover the ear when they are up! you're epic!

👍: 0 ⏩: 1

Sorelliena In reply to Silver-Kit [2011-06-05 23:12:04 +0000 UTC]

cinnamon bun <3 it's the thought that counts

have you ever considered purchasing ear cuffs? a lot of deviants sell them and they can be surgical steel or nickel, and don't require piercings 8) [link] [link] I am actually looking forward to trying to make these for people who don't have piercings (like my sister and friend etc ) and you could look into them, a lot of deviants can benefit from patronage

👍: 0 ⏩: 1

Silver-Kit In reply to Sorelliena [2011-06-06 03:04:38 +0000 UTC]

wow..... thanks. I have no idea what ear cuffs are... until now. thanks a ton! I"ll look later. If i open any more tabs my computer might kill me.....hehe....

👍: 0 ⏩: 0

netherwings [2011-05-24 20:54:08 +0000 UTC]

Damn, these are awesome! I love the idea! And seven hours to make, wow - you can really tell that a lot of effort was put into them They look great!

👍: 0 ⏩: 1

Sorelliena In reply to netherwings [2011-05-27 02:36:52 +0000 UTC]

Thanks a lot! 8D

👍: 0 ⏩: 1

netherwings In reply to Sorelliena [2011-06-01 23:04:02 +0000 UTC]

You are most welcome! ^___^

👍: 0 ⏩: 0

bamboolady [2011-05-12 16:32:04 +0000 UTC]

These are actually AMAZINGGGG!

👍: 0 ⏩: 0

shinuXIII [2011-05-10 01:36:37 +0000 UTC]

awesome....don't get into a fight though...^^

👍: 0 ⏩: 1

Sorelliena In reply to shinuXIII [2011-05-10 21:53:00 +0000 UTC]

...yeahhhhhhh, these things hurt if yanked off D<

👍: 0 ⏩: 0

LunaBinckoski [2011-05-09 01:16:07 +0000 UTC]

Woooow qué buenos q están!!!! se pueden adquirir en algun link?

👍: 0 ⏩: 1

Sorelliena In reply to LunaBinckoski [2011-05-09 15:53:02 +0000 UTC]

(I don't speak spanish ;_; sorry, but I did translate your comment so I know what it is )

unfortunately these are not for sale... sorry! i'm trying to figure out ways to make them customized for deviants...

👍: 0 ⏩: 0

Witbik [2011-04-28 05:12:23 +0000 UTC]

Man this is super neat. And I don't even normally like earrings!

👍: 0 ⏩: 0

KittyAzura [2011-04-14 18:44:52 +0000 UTC]

these are amazing! i've always wanted to make wings earrings! i just have no time D; it's a great idea to add cuff things at the end, i would have never thought of that! one day... one day i will make something like that ^_^

👍: 0 ⏩: 1

Sorelliena In reply to KittyAzura [2011-04-17 01:43:40 +0000 UTC]

Please do. If you make it, link me? I'd love to see

👍: 0 ⏩: 1

KittyAzura In reply to Sorelliena [2012-02-04 00:08:30 +0000 UTC]

HELLO!! REMEMBER ME?! i said like almost a year ago that i wanted to try making these winged cuff earrings! and now i finally did MWAHAHAHAHAHA *ahem*
anyways, here's the [link] hope u like!

👍: 0 ⏩: 0

KrynyKrynKryn [2011-04-12 21:05:52 +0000 UTC]

These are freaking beast!

👍: 0 ⏩: 0


| Next =>